When a buyer places an order, what actually happens behind the scenes? This article walks through the process step by step - from the first inquiry to the shipment leaving our facility. Every order follows the same structure, though the details may vary depending on the product and the customer's requirements.
Stage 1: Inquiry & Technical Evaluation (Day 1–2)
What happens:
The customer sends an inquiry with product details - bottle material, contents, special requirements and estimated quantity. Our sales team logs the inquiry and routes it to the technical team for evaluation.
What we check:
- Bottle material and neck finish (PE, PP, PET, glass, metal)
- Product type (liquid, powder, capsule) and filling temperature
- Sealing method preference (induction, pressure sensitive, heat seal)
- regulatory requirements (BRC, FDA, EU, PPWR)
Output:
A preliminary recommendation with one or two suitable liner options, or a request for physical bottle samples if further evaluation is needed.
Stage 2: Sample Testing (Day 3–5)
Sample testing can take one of two paths, depending on the customer's preference.
Path A: We prepare samples, customer tests on their own line.
If the customer already has their bottles and equipment, we can prepare liner samples matched to their specifications and ship them for the customer to test directly on their own production line. This gives the customer full control over the evaluation process.

Path B: Customer sends bottles to us, we test and send video.
If the customer prefers not to run the test themselves, or doesn't have the equipment available, they can send their bottle samples to us. Our technical team runs sealing tests in our lab, records a short video showing the sealing process and peel result, and sends it back for confirmation.

Either way, the goal is the same: the customer sees actual performance before committing to an order.
Stage 3: Customer Confirmation & Order Placement (Day 6–9)
What happens:
The customer reviews the sample results or testing video. If the seal meets their requirements, they confirm the liner specification and place a formal order.
What we confirm:
- Final liner type and dimensions
- Quantity and packaging requirements
- Delivery terms and lead time
Output:
Signed order confirmation with agreed specifications.
Stage 4: Production Scheduling & Material Preparation (Day 10–12)
What happens:
The order enters our production planning system. Raw materials are pulled from inventory or ordered from approved suppliers. Each batch of incoming material is checked against our quality specifications.

What we verify:
- Raw material certificates of analysis
- In-house sample testing before approval
- Production line availability and scheduling
Output:
Production order released to the workshop with a confirmed delivery date.
Stage 5: Production & In-Process Quality Control (Day 12–17)
What happens:
The liners are produced through lamination, slitting, and die-cutting. Quality checks are performed at each stage - not just at the end.

In-process checks:
- Lamination temperature, pressure, and speed monitoring
- Dimensional accuracy during die-cutting
- Visual inspection for defects
Output:
Finished liners packed and labeled with batch numbers for full traceability.
Stage 6: Final Inspection & Documentation (Day 17–18)
What happens:
Before packing, a final quality inspection is conducted. Certificates of analysis and test reports are prepared for the shipment.
Final checks:
- Seal integrity testing on finished goods
- Dimensional verification
- Packaging and labeling review
Output:
QC release note, certificates of analysis, and any required compliance documents.
Stage 7: Packing & Dispatch (Day 18–20)
What happens:
Finished goods are packed according to the customer's requirements. Depending on the order size and the customer's preference, shipment may be arranged by container, by pallet, or by carton through express or air freight.
For container shipments, we document the loading process and take photos for the customer's reference. For pallet or carton shipments, packing lists and shipping marks are confirmed before dispatch.




What we document:
- Carton labeling and shipping marks
- Container seal number (for container shipments)
- Loading or packing photos
Output:
Dispatch confirmation with photos sent to the customer.
Stage 8: Shipment & Follow-Up (Day 20+)
What happens:
The shipment departs. Shipping documents are sent to the customer, and our team follows up to confirm safe arrival.
What we provide:
- Shipping documents (Bill of Lading, packing list, or air waybill as applicable)
- Post-delivery follow-up
Output:
Delivery confirmation and ongoing support.
A Process Built on Repeatability
Every order - whether it's a first sample trial or a repeat shipment - follows this same structure. The details may vary depending on the product, the sample path chosen, and the shipping method requested. But the underlying process stays the same, because repeatability is what ensures consistent quality, order after order.
If you'd like to start your own order process, contact our sales team. We'll walk you through it step by step.
Frequently Asked Questions
How do I start an order with INTY?
+
-
Send us an inquiry with your product details and estimated quantity. Our sales team will log the inquiry and route it to the technical team for evaluation. You can also send bottle samples directly if you'd like us to recommend a liner match.
What happens if I don't know which liner I need?
+
-
You don't need to figure that out yourself. Send us your bottles and tell us about your product. Our technical team will evaluate the bottle material, neck finish, and product requirements, then recommend suitable pressure sensitive liners or induction seal liners for your application.
What quality checks are performed during production?
+
-
Quality checks are performed at each stage - lamination temperature, pressure, and speed monitoring; dimensional accuracy during die-cutting; and visual inspection for defects. Final inspection includes seal integrity testing, dimensional verification, and packaging review before dispatch.
How long does production take after order confirmation?
+
-
Typically 7–10 working days after order confirmation, depending on order quantity and whether customization is required. Custom sizes or materials may require additional lead time.
Can I get updates during production?
+
-
Yes. We provide updates at key stages, including sample confirmation, production scheduling, final inspection, and dispatch. For container shipments, we also send loading photos for your reference

